When E.ON Energy, a UK power company, identified internal corrosion to water cooling lines that serviced its Connah’s Quay gas-fired Power Station in Flintshire, North Wales it called on Fyfe FRP’s UK approved applicator, Construction Composites UK (CCUK), to carry out emergency repairs.
The company’s design and maintenance team had carried out internal surveys of the lines and learned that the concrete encased steel pipes were corroded internally to a point where an exposed section of the pipe, that sat above the ground was at risk of failing.
The team understood that was a clear risk of failure if repairs were not immediate to the 900mm diameter cooling water lines. These lines are used to carry water from a nearby river to the condensers at the power plant.
If left to fail the power plant would be forced to halt operations resulting in a lengthy disruption to the power supply of E.ON’s residential and business customers. The company would also be faced with a costly bill to replace the condenser lines all together.
The corrosion was likely caused by decades of continuous use; for large diameter pipes made from steel, ductile iron, or concrete, corrosion can lead to deterioration – threatening the structural integrity of the networks.
CCUK worked with E.ON’s technical team to design an external composite wrap system that was able to take the full pressure of the line should a fail occur. Using a combination of bidirectional and unidirectional composite Fyfe FRP strengthening system, an emergency repair was carried out.
A section of the pipe was excavated to allow surface preparation including crack repair works to the host pipe and the formation of a smooth transition where pipe diameters reduced using specialist epoxy mortars. All works were carried out during planned shutdowns and each repair took days under reduced pressure without significantly affecting the running of the station.
The power station now has a fully encapsulated high pressure repair, complete with UV stable coating in place, that is deigned to take the full water pressure within the line.
CCUK’s Operations and Marketing Director, Jamie Dempster said: “Our specialist repairs team was called to survey the 900mm diameter cooling water pipes, owned by E.ON Energy. We quickly determined that Fyfe’s carbon fibre strengthening system would be the quickest and simplest way to repair the pipes.
“It took one week for our team to strengthen and restore the pipes, allowing them to regain their original structural integrity and continue normal function”.
Jamie said the UK power and water industries are in need of innovative solutions which will provide structural strengthening, the upgrade of internal pressure capacity and a significant extension to the service-life of these structures.
“Time and cost-effective technologies are required, while minimum disturbance and disruption of everyday operations during any repair work are necessary,” he added.
Fyfe’s FRP system is extremely lightweight, versatile, and stronger than steel and being a carbon fibre product, it is environmentally friendly, making it a well-suited repair solution for the UK energy giant, whose ethos states “we’re taking action for climate”.
